Hydraulic Feed System
- Pulldown force: 23,300 lbs [10,569 kg]
- Retract force: 35,300 lbs [16,012 kg]
- Feed speed, down: 61 ft/min [18.6 m/min]
- Feed speed, retract: 41 ft/min [12.4 m/min], Rapid: 80 ft/min [24.3 m/min]
- Feed stroke: 6 ft [1.83 m]
Power Unit
- Diesel Engine: John Deere, 125 HP (93 kW)
- Engines include: 12V starting circuit, electronic engine module installed in the operators control panel, 18 gallon (68 l) fuel tank with lock, lockable battery box, cold weather starting package.
Right Angle Drive
- Single speed heavy duty right angle drive with tapered
roller bearings and a ring gear and pinion. All bearings and gears are lubricated through an oil bath. - 2 in. [50.8 mm] hardened output shaft with flex chain
coupling to a 2 in. [50.8 mm] kelly bar.
Drill Head Rotary
- Total enclosed “dry box” with tapered roller bearings.
- 2 in. [50.8] heat treated alloy steel kelly drive bar.
- 4-3/4 in. [120.7 mm] ID hollow spindle
Maximum torque and Maximum rpm (engine specific):
HIGH TORQUE OPTION
- John Deere – 1st gear: 17,000 ft-lbs [23,049 Nm]
6th gear: 638 rpm
HIGH SPEED OPTION
- John Deere – 1st gear: 8,000 ft-lbs [10,832 Nm]
6th gear: 960 rpm
SPT Automatic Hammer
- ASTM D-1586 standards, standard duty and heavy duty
- 140 lb [63.5 kg], 170 lb [77.1 kg]
- 300 lb [136.1 kg]
- 340 lb [154.2 kg] slugs available
- Hydraulic self compensating
Leveling Jacks
- 24 in [609.6 mm] and 36 in [914.4 mm] stroke available
Estimated Operating Capacities
- Hollow stem augers, 4-1/4 in [108 mm] ID: 250 ft [76 m]
- Continuous flight auger, 6 in [152.4 mm] OD: 300 ft [91 m]
- Rotary drilling, NWJ/NW drill rod with 5 in [127 mm] OD bit:
1,500 ft [457 m] - Diamond core drilling:
N wireline: 1,600 ft [487 m]
H wireline: 1,100 ft [335 m]
P wireline: 730 ft [222 m]
Note: Above drilling capacities may vary according to subsurface conditions, hoist capacity and rotary head option.
Hoist
Main
- Single line capacity: 8,500 lbs [3,855.5 kg] or 12,000 lbs [5,443.2 kg]
- Line speed: 0–52 ft/min [0–15.9 m/min], 0–325 ft/min [0–99.1 m/min] reverse
Auxiliary
- Single line capacity: 4,500 lbs [2,041.2 kg]
- Line speed: 0–135 ft/min [41.2 m/min]
Auxiliary
- Single line capacity: 3,000 lbs [1,361 kg]
- Line speed: 0–126 ft/min [38 m/min]
Safe-T Driver
- Single line capacity: 900 lbs [408.2 kg]
- Line speed: variable up, freefall down
Wireline HOISTS
- A wide variety are available
- Line capacities from 700 ft [213 m] to 7,500 ft [2,286 m]
Optional Equipment
- Mast: 25 ft [7.6 m], 28 ft [8.5 m] or 33 ft [10.1 m]
- In-out & Side-to-side slide base
- Rod clamp – underbody manual and hydraulic, jack mounted and swing out
- Hydraulic chuck – various sizes
- Break-out wrench, hydraulic activated
- Wide selection of auger/rod racks
- Mast Standpipe
- Water pumps – piston, centrifugal and progressive cavity
- Quick change spindle adapters
- Top mount water/air swivels for rotary and coring
- 2 in [50.8 mm] Hex Auger Coupling
- Driller/helper platforms
- Night Lights
Mounting Options
- Truck
- trailer
- track carrier
